Question: 2
Within an ACI fabric, a routng protocol is needed to assist with route redistributon between the outside networks and the internal fabric. Which routng protocol is needed to run in the fabric at locaton 1 to allow the VM access to the networks advertsed by the external Layer 3 network.
A. eBGP
B. OSPF
C. MP-BGP
D. iBGP
E. IS-IS
Answer: C
Friday, 17 March 2017
Thursday, 16 February 2017
400-151 Sample Question
Question: 1
Which IETF standard is the most efficient messaging protocol used in an lot network?
A. SNMP
B. HTTP
C. CoAP
D. MQTT
Answer: C
Which IETF standard is the most efficient messaging protocol used in an lot network?
A. SNMP
B. HTTP
C. CoAP
D. MQTT
Answer: C
Cisco Exam 350-080 Has Been Retired by Cisco
Cisco exam 350-080 has been retired by Cisco. Cisco replaced 350-080 with new Cisco exam 400-151.
Monday, 6 February 2017
350-080 Sample Question
Question: 20
Which Ether type is used to identify FIP?
A. 0x8914
B. 0x8906
C. 0x8915
D. 0x8905
Answer: A
Which Ether type is used to identify FIP?
A. 0x8914
B. 0x8906
C. 0x8915
D. 0x8905
Answer: A
Tuesday, 24 January 2017
350-080 Sample Question
Question: 19
How are IP multicast IGMP entries synchronized between vPC peers?
A. IGMP is not synchronized between vPC peers
B. Cisco Fabric Service carries IGMP entries across the vPC peer link
C. IP ARP synchronization under the vPC domain configuration also synchronizes IGMP
D. IGMP is flooded to the L2 domain, and there is no need to synchronize it between vPC peers
Answer: B
How are IP multicast IGMP entries synchronized between vPC peers?
A. IGMP is not synchronized between vPC peers
B. Cisco Fabric Service carries IGMP entries across the vPC peer link
C. IP ARP synchronization under the vPC domain configuration also synchronizes IGMP
D. IGMP is flooded to the L2 domain, and there is no need to synchronize it between vPC peers
Answer: B
Thursday, 15 December 2016
350-080 Sample Question
Question: 18
Which three statements best describe multicast operation on Cisco Nexus switches in a data center? (Choose three.)
A. Cisco NX-OS Software does not support PIM dense mode.
B. The command ip multicast-routing must be enabled in Cisco NX-OS Software before any multicast configuration is possible on the switch.
C. PIM CLI configuration and verification commands are not available until you enable the PIM feature with the feature pim command.
D. Cisco NX-OS Software supports multicast routing per Layer 3 VRF instance.
E. The default PIM operational mode on the Cisco Nexus 7000 switch is SSM.
Answer: A,C,D
Which three statements best describe multicast operation on Cisco Nexus switches in a data center? (Choose three.)
A. Cisco NX-OS Software does not support PIM dense mode.
B. The command ip multicast-routing must be enabled in Cisco NX-OS Software before any multicast configuration is possible on the switch.
C. PIM CLI configuration and verification commands are not available until you enable the PIM feature with the feature pim command.
D. Cisco NX-OS Software supports multicast routing per Layer 3 VRF instance.
E. The default PIM operational mode on the Cisco Nexus 7000 switch is SSM.
Answer: A,C,D
Wednesday, 10 August 2016
350-080 Sample Question
Question: 17
To use ERSPAN, which command must be configured in a service profile?
A. capability erspan
B. capability l3 control
C. capability monitor
D. capability session
E. capability span
Answer: B
To use ERSPAN, which command must be configured in a service profile?
A. capability erspan
B. capability l3 control
C. capability monitor
D. capability session
E. capability span
Answer: B
Subscribe to:
Posts (Atom)